CATEGORY

OUR PRODUCTS

All categories



Carbon black dispersant

Carbon-white dispersants

Flowing dispersants

Internal-adding type release agent

Adhesion promoter

Blooming inhibitor

Cross-linking active agent

Brightening agent

Rubber Accelerator

Rubber Antioxidant

Zinc Oxide

Your location：

Home

Products

Flowing dispersants

Number of views:

1136

KT-8W

规格型号：

Category

Flowing dispersants

APPLICABLE SCOPE Suitable for natural rubber, synthetic rubber and reclaimed rubber. Both sulfur vulcanization and peroxide vulcanization are applicable.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Quantity

Stock:

Email:market@allwardtech.com

Advisory



Product description

Parameters

PRODUCT DESCRIPTION

Composition: mixture of fatty acids and their esters, hydrocarbons, waxes and inorganic carriers

Appearance: white granular

Packing: double-layer packaging in plastic bag composite woven paper bag

Net weight: 25kg/bag

Storage time limit: stored in a ventilated, dry, non-corrosive warehouse for two years

Safety performance: non-toxic, harmless

PH value: 7.0-11.0

Heating loss (55℃): ≤2.0%

Inorganic content (950℃): ≤18.0%

APPLICABLE SCOPE

Suitable for natural rubber, synthetic rubber and reclaimed rubber. Both sulfur vulcanization and peroxide vulcanization are applicable.

PERFORMANCE CHARACTERISTICS

1. KT-8W improves the mixing effect of the rubber compound, effectively accelerates the dispersion of carbon black and other fillers in the rubber compound, further shortens the mixing time, increases the extrusion and calendering speed, and reduces energy consumption.

2. KT-8W can prevent the rubber from sticking to the roller and reduce the risk of early scorch, especially when using high wear-resistant fillers. It can effectively improve the fluidity of the rubber compound, reduce the Mooney viscosity of the mixed rubber, improve the compactness and brightness of the extruded and calendered products, reduce the defects of the finished products, and improve the appearance quality and qualification rate of the products.

3. KT-8W has good plasticizing properties. It can be quickly filled with lower pressure during conversion and injection molding, and has good mold release.

4. KT-8W does not affect the bridging system of peroxide, and has good compatibility with various rubbers. Under the premise of the recommended dosage, it has no adverse effect on the physical properties of the product, and can be widely used in various in rubber ingredients.

5. KT-8W is environmentally safe and meets ROHS, REACH and other requirements.

INSTRUCTIONS FOR USE

KT-8W can be added together with other chemical compounding agents during the mixing process, and the effect of adding it in advance is better.

DOSAGE RECOMMENDED

1. Add 1~4 parts of the raw rubber amount.

2. The amount of polar glue is appropriately increased.